Livarno 102618-14-01-BS - Manual (Page 9)

9 GB/IE/CY
Remove the battery from the device if it is not going to be
used for a prolonged period.
Use only the recommended battery type!
When inserting the battery ensure the correct polarity!
This is shown in the battery compartment.
If necessary, clean the batteries and device contacts
before inserting batteries.
Promptly remove drained batteries from the product.
Safety advice for installation
Do not use any sharp and / or pointed objects, such as
wire, nails or clamps, to fasten the product in place.
The plug must be plugged into an easily accessible
socket, to ensure the plug can be unplugged easily in an
emergency.
The luminaire is not suitable for mounting on tubular
material.
102618_Glaskantenbeleuchtung_content_GB_IE_CY.indd 9 18.08.14 15:09