Safety / start-up introduction / safety, Start-up, Installation – Livarno 7323-018L User Manual

Page 25

Advertising
background image

25

GB

Safety / Start-up

Introduction / Safety

due to improper handling or failure to comply with
the safety instructions!

RISK OF FATAL

INJURY AND ACCIDENT HAZ-
ARD FOR TODDLERS AND

SMALL CHILDREN! Never leave children
unattended with the packaging material. The
packaging material represents a danger of suf-
focation. Children frequently underestimate the
dangers.

This device may be used by children age 8 years
and up, as well as by persons with reduced phys-
ical, sensory or mental capacities, or lacking
experience and / or knowledge, so long as they
are supervised or instructed in the safe use of
the device and understand the associated risks.
Children should not be allowed to play with the
device. Cleaning and user maintenance should
not be performed by children without supervision.

Avoid the risk of fatal injury
from electric shock

Check the lamp for possible damage before
every use. Never use the light if it shows any
signs of damage.

CAUTION! A damaged light means danger
of death from electric shock. In the event of
damage, repairs or other problems with the light
please contact the service centre or a qualified
electrician.

To avoid hazards, if the external flexible lead on
this lamp is damaged it must be replaced by the
manufacturer, their service representatives or
an equivalent professional!

Verify the existing mains voltage matches the
required operating voltage of the lamp (230 V∼)
before use.

Ensure that the light does not come into contact
with water or other liquids under any circum-
stances.

Always unplug the lamp from the mains prior
to assembly, disassembly, cleaning or if the
lamp will not be used for extended periods.

Never open any of the components of the elec-
trical equipment or insert any objects into the

same components. This will pose a risk of fatal
injury from electric shock.

The illuminant is not replaceable.

This light is not suitable for dimmer or electronic
switches.

Prevent fire and
injury hazards

RISK OF INJURY! Check every illuminant for
damage immediately upon unpacking. Do not
install the light if the illuminants are defective.
Should this be the case, contact the service
centre for a replacement.

Do not look directly into the light source (light
bulb, LED etc.).

Do not leave the light or packaging material ly-
ing unattended. Plastic film or bags, plastic parts
etc. can turn into dangerous toys for children.

Do not cover the lamp or the mains plug with
objects. Excessive heat can result in a fire.

Do not operate the lamp unattended.

Safe working

Mount the light so that it is protected from mois-
ture and dirt.

Carefully prepare for assembly and allow your-
self adequate time. Organise all parts and any
necessary additional tools or materials before
starting so they are easy to reach.

Always be attentive! Always pay attention to
what you are doing and use common sense.

Never assemble the lamp whilst unfocused or
feeling unwell.

Start-up

Installation

Model 7323-018L:

Install the adjustment lever

2

by screwing it

clockwise into the reflector

1

.

Push the rods

3

through the base

5

.

Advertising
This manual is related to the following products: