Livarno Z31392A-BS - Manual (Page 10)

10 GB/IE
1. Using a pencil, mark the position
on the wall on to which you
intend to attach the LED light
strip. If necessary, use a spirit
level as a guide.
2. Pull the paper from the double-
face tape 2 on the back of
the LED strip 1 (Fig. B).
3. Position the LED light strip on
the pencil markings on the wall
and press to fix it firmly into
place (Fig. B).
4. Pull the paper from the double-
face tape on the back of the
cable holders
3 (Fig. C).
5. Press to fix the cable holders
firmly into place (Fig. C).
6. Mount the power lead 4 in
the cable holders (Fig. C).
Shortening the
LED strip
The LED strip can be shortened with
scissors every 10 cm at the indicated
positions.
Operation
Insert the mains adapter 6
into the mains socket.
Press the ON / OFF switch on
the in-line switch 5 to switch
on the lights.
Press the ON / OFF switch on
the in-line switch to switch off
the lights.