Livarno 7424-018L-BS - Manual (Page 7)

7 GB/IE
... / Operation / Cleaning and maintenance / Disposal / Warranty and Service
Before Initial Use
Remove the threaded ring 6 from the socket 2
by turning it counter-clockwise (Fig. B).
Remove the lamp shade 1 and turn by 180°
(Fig. B).
Pull the lamp shade 1 over the socket 2
(Fig. C).
Tighten the threaded ring 6 onto the socket 2 ,
turning it clockwise (Fig. C).
Screw the light bulb 7 clockwise into the
socket (Fig. C).
Your light is now ready to use.
Operation
Using the lamp
Unwind the mains cable 4 completely before
use.
Insert the mains plug 5 into the socket.
Turn the light on and off with the ON / OFF
switch 3 .
Replacing a bulb
CAUTION! DANGER TO LIFE FROM
ELECTRIC SHOCK! Pull the mains plug 5 out of
the socket.
Turn the defective light bulb 7 anti-clockwise
out of the bulb socket.
Use a clean, fluff-free cloth when you are re-
placing a bulb.
Screw the new light bulb 7 clockwise into the
socket (Fig. E).
Cleaning and maintenance
CAUTION! DANGER TO LIFE FROM
ELECTRIC SHOCK! Before cleaning, always pull
out the mains plug
5 out of the socket.
Do not use solvents such as petrol and the like
as they could damage the lamp.
For electrical safety reasons, never clean the
lamp with water or other fluids or immerse it in
water.
Use a dry, fluff-free cloth for cleaning.
The lamp is maintenance-free.
Disposal
The packaging consists entirely of envi-
ronmentally friendly materials. They can
be disposed of at your local recycling
facility.
The symbol of the wheelie bin with a
cross through It means that, in the
European Union, the product has to be
disposed of in a separate refuse collection. This ap-
plies to the product and to all components bearing
this symbol. Products marked in this way may not
be disposed of with normal domestic waste but
have to be handed in at a recycling collection point
for electrical and electronic appliances. Recycling
helps to reduce the consumption of raw materials
and to ease the burden on the environment.
Warranty and Service
Warranty Declaration
This product has a 3-year warranty from the date of
purchase; the warranty is only valid for the original
purchaser and is not transferable. Please keep your
receipt as proof of purchase. The warranty applies
to material or manufacturing defects only. It does not
cover wear parts or damage caused by improper
use. The guarantee lapses in cases of unauthorized
tampering. Your statutory rights are not restricted in
any way by this warranty. Please contact the service
centre by telephone. In the event of any claims under
the warranty. This is the only way to ensure that your
instrument can be returned free of charge.