Livarno Z31669A/Z31669B - Manual (Page 8)

8 GB
circuit. To do so, remove the fuse or switch off
the circuit breaker in the fuse box (0 position).
Allow the light to cool completely.
Loosen the spring ring 3 from the lamp
housing 1 .
Withdraw the defective bulb 2 and bulb
holder 8 a little from the lamp housing.
Use a clean, lint-free cloth to replace a bulb.
Never touch the glass of the halogen lamp
with bare fingers, even when cold, as the
glass can become matt through contact with
the sweat on the skin. In doubt, use a little bit
of alcohol to clean the surface of the glass.
Keep hold of the fitting and turn the bulb
with a ¼ turn anti-clockwise out of the fitting.
Use only 230 V~bulbs with a GU10 socket
and a maximum power of 40 watts.
Do not use cool beam bulbs.
Risk of overheating!
Fit the new bulb. Insert the bulb carefully into
the socket and tighten it with a ¼ turn in a
clockwise direction.
Secure the bulb to the lamp housing, using
the spring ring. Check for correct fitting (see
Fig. A).
Cleaning and care
CAUTION! RISK OF ELECTRIC
SHOCK! Disconnect the light from
the mains circuit before cleaning. To
do so, remove the fuse or switch off the circuit
breaker in the fuse box (0 position).
CAUTION! RISK OF ELECTRIC
SHOCK! For reasons of electrical
safety, never clean the light with water
or other fluids, or immerse it in water. Only use
a dry, lint-free cloth for cleaning.
Disposal
The packaging is made of environmen-
tally friendly materials, which may be
disposed through your local recycling
facilities.
Contact your local authorities for information
on how to dispose of the product at the end of
product life.
Never dispose of the product and
the bulb in your regular household
rubbish.
Dispose of the product and light bulb through
an authorised waste management company or
your municipal disposal facilities.
Observe the applicable regulations. When in
doubt please contact your waste disposal centre.
Warranty
The device has been manufactured to strict
quality guidelines and meticulously examined
before delivery. In the event of product defects
you have legal rights against the retailer of this
product. Your legal rights are not limited in any
way by our warranty detailed below.
The warranty for this device is 3 years from the
date of purchase. Should this device show any
fault in materials or manufacture within 3 years
from the date of purchase, we will repair or replace
it – at our choice – free of charge to you.
The warranty period begins on the date of pur-
chase. Please keep the original sales receipt in a
safe location. This document is required as your
proof of purchase. This warranty becomes void
if the device has been damaged or improperly
used or maintained.