Livarno CEILING LIGHT - Manual (Page 24)

24 GB
Safety / Preparation / Prior to installation Introduction / Safety
Ceiling light
Introduction
Congratulations on your new product.
You have selected a high quality product.
Please be sure to carefully read the
complete operating instructions. Fold out the page
with the illustrations. These instructions are part of the
product and contain important information on setup
and handling. Always follow all safety instructions.
Before using this product for the first time verify the
correct voltage and that all parts are properly installed.
Should you have any questions or you are unsure
about operating the product, please contact the
dealer or service centre. Please keep these instructions
in a safe place and pass them on third parties as
applicable.
Intended use
This light is only suitable for indoor use, in dry and
enclosed rooms. The light is only intended for ceiling
mounting. This product is intended for private
household use only.
Scope of delivery
Check immediately after unpacking that the parts
are complete and that the product is in proper
condition.
1 Ceiling light, model 3261-016L, 3263-016L,
3264-016L or 3265-016L
1 Glass shade
2 Rawlplugs
2 Screws
2 Fibre glass hoses
1 Installation instructions
Parts description
1 Rawlplug
2 Glass panel holder
3 Connection housing
4 Socket
5 Mains connection lead (external)
6 Screw
7 Fibre glass hose
8 Bulb
9 Lamp glass
10 Notch
Technical Data
Operating voltage: 230 V∼ 50 Hz
Lamps:
E27, max. 40 W
Rated power max.: 1 x E27, max. 40 W
Protection class :
I /
Protection class: IP20 (only suitable for
indoor use)
Safety
Safety information
Damage due to failure to comply with these operating
instructions will invalidate the guarantee! We assume
no liability for consequential damage! We assume
no liability for material damage or personal injury
due to improper handling or failure to comply with
the safety instructions!
Avoid the risk of fatal injury
from electric shock
Ensure that a qualified electrician, or a person
trained to carry out electrical installations,
performs the electrical installation.
Always check the light, power supply, and mains
cable for damage before plugging it in. Never
use the light if it shows any signs of damage.