Envision Peripherals EN7600 - Manual (Page 9)

8
OPERATING INSTRUCTIONS
GENERAL INSTRUCTIONS
Press the power button to turn the monitor on or off. The other control
buttons are located on the front panel of the monitor (See Figure 4). By
changing these settings, the picture can be adjusted to your personal
preferences.
 The power cord should be connected.
 Connect the video cable from the monitor to the video card.
 Press the power button to turn on the monitor position. The power
indicator will light up.
Figure 4 External Control Button
EXTERNAL CONTROLS
1. MENU / ENTER 2. / Contrast
3. Power Button/ LED 4. / Brightness
5. Auto Adjust button / Exit