Starting cold engine – Echo SRM-210 User Manual

Page 15

Advertising
background image

G

RASS

T

RIMMER

/B

RUSH

C

UTTER

O

PERATOR

'

S

M

ANUAL

15

STARTING

COLD

ENGINE

WARNING

DANGER

The attachment will operate immediately when the engine starts and
could result in loss of control and possible serious injury. Keep
movable parts of the attachment off the ground and away from
objects that could become entangled or thrown.

1. Stop Switch

Move stop switch button (A) forward away from the STOP position.

2. Choke

Move choke lever (B) to Cold Start Position (

).

3. Primer

Pump primer bulb (C) until fuel is visible and flows freely in the clear
fuel tank return line. Pump bulb an additional 4 or 5 times.

4. Recoil Starter

Lay the unit on a flat area and keep movable attachment parts clear
of all obstacles. Firmly grasp right hand grip and throttle trigger
lockout with left hand and fully depress throttle trigger to wide open
position. Rapidly pull recoil starter handle/rope (D) until engine fires
(or maximum five [5] pulls).

5. Choke

After engine fires (or 5 pulls), move choke lever back to Run (

)

position. Hold throttle trigger and throttle trigger lockout fully
depressed, and pull recoil starter starter handle/rope until engine
starts and runs. Release throttle trigger, and allow unit to warm up at
idle for several minutes.

NOTE
If engine does not start with choke in “Run” position after 5 pulls,
repeat instructions 2 - 5.

6. Throttle Trigger

After engine warm-up, gradually depress throttle trigger to increase
engine RPM to operating speed.

B

D

A

C

Advertising