Livarno Z30618A-BS Z30618B-BS - Manual (Page 7)

7 GB/IE
Safety / Use
problems with the device, or for the
performance of repairs to the device.
J  Never open any of the electrical
equipment or insert any objects into
it. Such interventions represent the
danger of death from electric shock.
J  It is essential that the device does
not come into contact with water or
other liquids.
J  Never touch the mains plug 4
with damp or wet hands.
J  Protect the mains lead against sharp
edges, mechanical stresses and hot
surfaces.
J  Never use the device in the immedi-
ate vicinity of a bathtub, shower or
swimming pool.
J  If the lamp is not to be used for an
extended period (e.g. during your
holidays), pull the mains plug
4
out of the mains socket.
J   This lamp is only intend-
ed for use indoors.
Q 
Use
For Model Z 30618 A only:
j  Before using the lamp for the first
time, remove the ring of lampholder
1 by screwing it anticlockwise off
the lamp base 6 .
j  Take off the lamp shade 2 , turn it
upside down and place it once
more on to the lamp base 6 .
j  Screw the ring of lampholder 1
back on to the lamp base 6 .
j  Insert the bulb 3 into the fitting
and tighten by turning it clockwise.
j  Ensure that the bulb 3 is securely
and firmly seated.
j  Set up the lamp on a horizontal,
even surface.
j  Insert the mains plug 4 into the
socket.
j  Press the ON / OFF switch 5 to
turn the table lamp on or off.
For model Z30618b
j  Before using the lamp for the first
time, screw the supplied bulb
3
into the fitting of the lamp. Ensure
that the bulb
3 is securely and
firmly seated.
j  Set up the lamp on a horizontal,
even surface.
j  Insert the mains plug 4 into the
socket.
j  Press the ON / OFF switch 5 to
turn the table lamp on or off.
Q 
Replacing a bulb
j  Switch off the lamp using the
ON / OFF switch
5 .
j  Pull the mains plug 4 out of the
mains socket and allow the lamp to
cool for at least 10 minutes.