Livarno LHS 55 A1 - Manual (Page 68)

Rechargeable Battery Flashlight LHS 55 A1
66 - English
Do not touch the glass with your fingers.
Touching the lamp glass can reduce the bulb's
lifetime. We recommend that you use a soft,
lint-free cloth.
 Fix the bulb again with the holding wire and
reconnect the cable.
Warning:
Make sure the insulation hose fully covers the
cable connector, otherwise there is a risk of
short-circuit!
 Re-insert the reflector [2] and make sure that the
two pins of the reflector [2] fit into the holes of the
standing bolts of the flashlight housing. This fixes
the reflector [2] to the flashlight housing.
 Insert the reflector ring [3] and turn it clockwise to
fasten.