Elmo Dome Camera TND4004 - Manual (Page 9)

- 8 -
(8) While watching the monitor, adjust the image
direction.
· Right/left direction (Fig. 8)
Loosen the pan lock screw, turn the base
right and left, and adjust the right/left
direction. After setting the right/left
direction, tightly fasten the pan lock screw.
* If the pan lock screw is not tightly
fastened, the base may turn when the
dome cover is mounted.
* Be careful not to drop the pan lock screw.
· Up/down direction (Fig. 9)
Loosen the tilt lock screw, and adjust
up/down direction.
After setting the up/down direction, fasten
the tilt lock screw.
* Manually fasten the tilt lock screw.
If fastened with pliers or the like, the tilt
lock screw may be broken.
50 °
(Fig. 8)
(Fig. 9)
Tilt lock screw
Base
Pan lock screw
(9) Adjust the optical axis (Fig. 10).
Correct the tilt of the image with the optical
axis ring.
* Be sure to hold the optical axis ring when
making this correction.
(10) Adjust the angle of view with the zoom ring
(Fig. 11).
(Fig. 10)
(Fig. 11)
Optical
axis ring
Zoom ring