Livarno 3208–100L - Manual (Page 15)

15 GB
LED Fairy Lights
Introduction
Congratulations on your new product.
You have selected a high quality prod-
uct. Please be sure to carefully read the
complete operating instructions. Fold out the page
with the illustrations. These instructions are part of
the product and contain important information on
setup and handling. Always follow all safety in-
structions. Before using this product for the first time
verify the correct voltage and that all parts are
properly installed. Should you have any questions
or you are unsure about operating the product,
please contact the dealer or service centre. Please
keep these instructions in a safe place and pass
them on third parties as applicable.
Intended use
This product is suitable for indoors and outdoor
use. This device is only intended for use in a private
domestic environment, not for commercial use. Any
use other than that described above is prohibited
and will result in product damage. It is further
associated with dangers, e.g. short circuit, fire,
electric shock, etc.
Scope of delivery
Check immediately after unpacking that the parts
are complete and that the product is in proper
condition.
1 LED fairy lights, Model 3208–100L
1 Set of instructions for use
1 Mains supply
Parts description
1 Fairy lights
2 Mains adapter
3 LEDs
4 Fastening screw thread
Technical Data
Item no.: 3208–100L
Fairy lights:
Operating voltage
(fairy lights):
12 V
Output in Watts
(fairy lights):
max. 3.0 W
Illuminant: 10 x 3 LED
(not replaceable)
Protection class
(fairy lights):
III /
Degree of protection
(fairy lights):
IP44 (splash-proof)
Mains adapter:
Operating voltage
(mains adapter):
100–240 V∼
50 / 60 Hz
Output voltage
(mains adapter):
12 V
max. 500 mA
Protection class
(mains adapter):
II /
Degree of protection
(mains adapter):
IP44 (splash-proof)
Output in Watts
(complete set 3208-100L):
max. 4.5 W
Operating voltage
(complete set 3208-100L):
230–240 V∼
50 Hz
Introduction