Livarno LED Desk Lamp - Manual (Page 21)

21 GB
Introduction / Safety
LED Desk Lamp
Introduction
Congratulations on your new product.
You have selected a high quality prod-
uct. The instructions for use are a part of
the product. They contain important information
about safety, use and disposal. Before using the
product, please familiarise yourself with all the
operating and safety instructions. Only use the
product as described and for the indicated purpose.
When passing this product on to others, please be
sure to include all its documentation. Before using
this product for the first time, verify the correct
voltage and that all parts are properly installed.
Intended use
This light is only suitable for indoor use in dry and
enclosed spaces. This product is intended for
private household use only.
Scope of delivery
Immediately after unpacking, verify the parts are
complete and the product is in proper condition.
1 LED Desk Lamp, Model 7431–012L
1 Lamp base
1 Pin spanner
1 Set of instructions for use
Parts description
1 LED light strip
2 ON / OFF switch
3 Rods
4 Lamp base
5 Stud screw
6 Power cable with plug adapter
7 Pin spanner
Technical Data
Operating voltage: 230–240 V~ 50 Hz
Output: 12 V max. 500 mA
Illuminant: 21 LED (non-replaceable)
Rated power typical: max. 5 W
Protection class:
II /
Safety
Safety information
Damage due to failure to comply with these operat-
ing instructions will void the warranty! We assume
no liability for consequential damage! We assume
no liability for material damage or personal injury
due to improper handling or failure to comply with
the safety instructions!
Avoid the risk of fatal injury
from electric shock
Always check the plug adapter for damage
before using the lamp. Never use the light if it
shows any signs of damage.
In the event of damage, repairs or other prob-
lems with the lamp, please contact the service
centre or an electrician.
Ensure that the light does not come into contact
with water or other liquids under any circum-
stances.
Never open or insert anything into electrical
fittings or equipment (e.g. switches, fitting
socket). This will pose a risk of fatal injury from
electric shock.
Only touch the insulated area of the plug
adapter 6 when connecting to or disconnect-
ing from the mains!
The flexible outer cable is not replaceable; if
the cable is damaged, the lamp must be
disposed of.
Ensure before use that the available mains volt-
age matches the voltage required for operating
the lamp (230–240 V∼).