Before initial use, Operation, Changing the bulb – Livarno Z31207A-BS/Z31207B-BS User Manual

Page 6: Cleaning and care, Disposal, Warranty

Advertising
background image

6 GB

Disconnect the product from the mains supply if

it is not going to be used for some time (e.g.
holiday).

Only use 230 V ∼ halogen light bulbs with a

E14 base and a maximum output of 42 watt.

Set the lamp in a stable, clean and even place.

0.5 m

FIRE HAZARD! Fit the light so that
it is at least 0.5 m away from the
material illuminated. Fire can result

from the development of too much heat.

Before initial use

Before assembly, ensure that the mains voltage

available corresponds to the operating voltage
necessary for the lamp (230 V ∼). Do not con-
nect the lamp if this is not the case.

Screw the lamp into the socket until a flawless

contact is enabled. Only use the lamp with an
E14 base.

CAUTION! Use the lamp with a maximum
power output of 42 watt. Using a higher power
output could cause damage to the lamp.

Use halogen bulbs only.
Do not use energy saving bulbs. Energy saving

bulbs are not dimmable.

Operation

Operate the lamp in accordance with the

figures.

Please note: This lamp is equipped with a dim-
mer that regulates the light into 3 different levels of
brightness by touching the metal foot.

Changing the bulb

Before changing the bulb, switch off the lamp

and remove the mains plug from the socket. Let
the existing bulb cool down for 15 minutes.

Cleaning and care

Use a dry, soft and fluff-free cloth for cleaning

and care. Use a slightly moist and a mild deter-
gent to remove stubborn dirt.

Disposal

The packaging is made entirely of recy-
clable materials which you may dispose
at local recycling facilities.

Contact your local community or municipal
administration for more details on how to dispose
your worn-out product.

To help protect the environment, please
dispose the product properly, and not in
the household waste, when it has
reached the end of its useful life. Infor-
mation on collection points and their
opening hours can be obtained from
your local authority.

Warranty

The device has been manufactured to strict quality
guidelines and meticulously examined before deliv-
ery. In the event of product defects you have legal
rights against the retailer of this product. Your legal
rights are not limited in any way by our warranty
detailed below.

The warranty for this device is 3 years from the
date of purchase. Should this device show any fault
in materials or manufacture within three years from
the date of purchase, we will repair or replace it -
at our choice - free of charge to you.

The warranty period begins on the date of pur-
chase. Please keep the original sales receipt in a
safe location. This document is required as your
proof of purchase. This warranty becomes void if
the device has been damaged or improperly used
or maintained.

31191_livx_Touchlampe_Glasschirm_Content_CZ_SK.indd 6

05.02.14 10:42

Advertising
This manual is related to the following products: