Emerson Process Management ControlWave Remote Ethernet I/O - Manual (Page 3)

Product Data Document
420DS-2b
July 16, 2007 - Page 3
Bristol ® Remote Ethernet I/O
Emerson Process Management
Remote Automation Solutions
Watertown, CT 06795 USA
T 1 (860) 945-2200
Mississauga, ON 06795 Canada T 1 (905) 362-0880
Worcester WR3 8YB UK T 44 (1) 905-856950
Website: www.EmersonProcess.com/Remote
© 2007 Remote Automation Solutions, division of Emerson Process Management. All rights reserved.
Bristol, Inc., Bristol Babcock Ltd, Bristol Canada, BBI SA de CV and the Flow Computer Division , are wholly owned subsidiaries of Emerson Electric Co. doing business as Remote Auto-
mation Solutions (“RAS”), a division of Emerson Process Management. FloBoss, ROCLINK, Bristol, Bristol Babcock, ControlWave, TeleFlow and Helicoid are trademarks of RAS. AMS,
PlantWeb and the PlantWeb logo are marks of Emerson Electric Co. The Emerson logo is a trademark and service mark of the Emerson Electric Co. All other marks are property of their
respective owners.
The contents of this publication are presented for informational purposes only. While every effort has been made to ensure informational accuracy, they are not to be construed as war-
ranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. RAS reserves the right to modify or improve the designs or
specifications of such products at any time without notice. All sales are governed by RAS’ terms and conditions which are available upon request. RAS does not assume responsibility for
the selection, use or maintenance of any product. Responsibility for proper selection, use and maintenance of any RAS product remains solely with the purchaser and end-user.
ControlWave Ethernet I/O Configuration Tools
The ControlWave Ethernet I/O Tool Kit is a Windows
configuration utility for initial setup and testing of all
Ethernet I/O modules. This easy to use utility allows
assignment of communication paramenters
including I/P address, comm port baud rate and
module address. It also provides I/O setup, tag
name assignment, scaling factors, etc.
Once the module is configured it can be tested for
proper operation before being put into operation.
Remote Setup Module
In conjunction with the configuration software, the
Remote Setup Module provides a RS 232 interface
to the PC allowing the Ethernet module base to be
initially configured with a I/P, module address RS
485 port baud rate, etc. The Setup module plugs
into any Ethernet I/O base so one Setup module
can be used for the entire system. All Ethernet I/O
modules can be configured through a local Ethernet
connection with the configuration software only or
through a Ethernet network using the Setup module.
The Setup module is most useful when configur-
ing a RS 485 network since it allows configuration
through a RS 232 PC port rather than requiring the
RS 485 in the PC.