7537n1 im p026,27_gb.pdf – Elta 7537N1 User Manual

Page 14

Advertising
background image

27.

26.

D) In CD / MP3 playback mode press

RPT to repeat the current track, S-RPT is displayed.

Press and hold

RPT to repeat the current folder and D-RPT is displayed. Press RPT again to

exit repeat mode.

E) In CD / MP3 playback mode press

RDM to randomly repeat the all tracks, S-RDM is

displayed. Press and hold

RDM to randomly repeat all tracks in the folder, D-RDM is

displayed. Press RDM again to exit random mode.

F) In MP3 playback mode the preset station buttons

5 and 6 access a 10-track skip up and

down.

13. MODE BUTTON MOD

Toggle between radio and CD / MP3 modes.

14. EJECT BUTTON

Press to eject the disc from the CD drive.

15. CLOCK BUTTON CLK

1) In radio mode repeatedly press

CLK to cycle through the display: PS NAME →

FREQUENCY → CURRENT TIME → PTY.

If no RDS data are received the display shows: FREQUENCY → CURRENT TIME → PTY.

2) In playback mode press to display the current time for 5 seconds. The display returns

automatically to the previous display.

3) To set the current time press and hold

CLK, until the time flashes in the display; set hours

and minutes with + or -.

TROUBLESHOOTING

To solve the common problems, read and follow the troubleshooting list. If you still cannot solve the

problem, consult your nearest service dealer.

Symptom

Cause

Solution

No power

The car ignition is not on.

If the power supply is properly

connected to the car accessory

switch, turn the ignition key to

ACC.

Disc cannot be loaded

Presence of CD disc inside the

player.

Remove the disc in the player and i

nsert a new disc with the label up.

The fuse is blown.

Replace the fuse.

No sound

Volume is set to minimum.

Adjust volume to desired level.

Wiring is not properly connected. Check wiring.

The function keys do not

work

The built-in microcomputer is not

operating properly due to noise.

Press the RESET button.

Front panel is not properly fix into

its place.

Reinstall the front panel.

Disc cannot be read

Disc is inserted upside down.

Insert the compact disc with the

label facing up.

Compact disc is extremely dirty or

defective.

Clean the disc or try to play a new

one.

Temperature inside the car is too

high.

Cool off until the ambient

temperature returns to normal.

Sound skips

The installation angle is more

than 30º

Adjust the installation angle to

less than 30º.

The disc is extremely dirty or

defective.

Clean the compact disc or play a

new one.

The radio does not work;

the auto search function

does not work

The antenna cable is not

connected.

Connect the antenna cable firmly.

The signals are too weak.

Select a station manually.

TECHNICAL SPECIFICATIONS

GENERAL

Power supply

DC 12V

Power consumption

max. 7A

Power output

4 X 25 W (@ 14.4V)

LINE-OUT

CD max. 800mV

FM

Frequency range

87.5MHz - 108.0MHz

Sensitivity

3 µV

IF frequency

10.7MHz

AM

Frequency range

522kHz - 1620kHz

Sensitivity

40dB

IF frequency

450kHz

CD PLAYER

System

Compact Disc Audio System

Compatible disc formats

CD / CD-R / CD-RW / MP3

Signal format

Sampling frequency 44.1kHz

Frequency characteristics

20-100Hz ≤ 5dB

10-20kHz ≤ 5dB

S/N ratio CD

50dB @ 1kHz

Channels

2 (Stereo)

Dimensions

approx. 178 x 50 x 188 mm

Weight

approx. 1.6 kg

SUBJECT TO CHANGES WITHOUT PRIOR NOTICE.

Advertising