Livarno Z31330-BS - Manual (Page 49)

49 GB/MT
Pos. 2: 50 % light power
Pos. 3: front light flashes.
Using the LED torch as motion
sensor (see Fig. B)
Plug the LED torch 2 onto the charger 3 .
Plug the charger into the mains socket.
As soon as the motion sensor 5 registers a
movement in dark environments, the side
light (6 LEDs)
7 switches on again for
about 20 seconds (+ / - 5 seconds)
Using the LED torch as light
for orientation (see Fig. B)
You can use the LED torch as a light for orienta-
tion in case of a blackout.
Plug the LED torch 2 onto the charger 3 .