Silvercrest MZ 20-1 - Manual (Page 11)

11 GB/IE/CY
Selecting the
operating mode
The device will work in switching mode or in
continuous mode.
Activating switching mode
Plug the device into a socket.
Connect and switch on the load.
Slide the toggle
5 down until it locks in.
The status light 6 will light up when
switched time is activated.
Activating continuous operation
Plug the device into a socket.
Connect and switch on the load.
Slide the toggle
5 all the way up until
it locks in.
The status light
6 will light up.