Silvercrest SZP 25 A1 - Manual (Page 31)

- 28 -
• Children should be supervised to ensure that they do not play with the appliance.
• Provide for a safe and slip-free positioning of the appliance.
• Ensure that the power plug is easily accessible in the event of danger, and that
there is no danger of anyone tripping over the power cable.
Using the appliance safely:
• In the event of danger, immediately remove the power plug from the wall socket.
• Do not use the appliance outdoors.
Set-up and assembly of the
appliance
Caution:
Ensure that the power plug is not in the power
socket before assembling the appliance. Otherwise
there is a risk that the appliance could start
unintentionally.
1. Unwind the power cable o completely from the
cable storage s and secure it in the lateral
recess on the appliance plinth a .
2. Place the appliance plinth a on a level and
slipfree surface.
Note:
Rinse all removable components thoroughly before
the first usage of the appliance (see chapter
"Cleaning and care").
3. Place the juice collector u on the drive axle i
of the appliance plinth a and turn it clockwise
as far as it will go.
4. Place both parts of the fruit pulp sieve r / y
into each other so that the fruit pulp regulator t
protrudes through the recess. Both parts must
audibly engage.
5. Place the assembled fruit pulp sieve r / y on
the juice collector u . The fruit pulp regulator t
must lie on the grip and catch in the rabbet on
the grip.
6. Press the small squeezing cone e on the drive
axle i so that it engages.
Note:
If you want to press oranges or other larger fruits,
place the large squeezing cone
w over the small
squeezing cone e . Ensure that the lobes of the
small squeezing cone e engage in the recesses of
the large squeezing cone w .
7. Insert the power plug into a wall power socket.
The appliance is now ready for use.
IB_102538_SZP25A1_LB1 07.07.2014 11:37 Uhr Seite 28