Time and alarm function – Silvercrest SWED 100 A1 User Manual
Page 10
- 8 -
Time and alarm function
The appliance can switch itself on under timed control, e.g. as an alarm
function. The requirements are that the clock is correctly adjusted, an alarm
time is programmed in and the alarm function is switched on. Additionally,
a radio station should be selected and a sufficiently loud volume level be set.
Notice: To adjust the time and alarm settings the appliance must be
switched off.
a) Setting the clock
• To set the hour indicator, press and hold the button “TIME”
and,
at the same time, press the button “HOUR”
.
• To set the minute indicator, press and hold the button “TIME”
and, at
the same time, press the button “MIN”
.
b) Programming the alarm time
• To set the hour indicator, press and hold the button “ALARM”
and,
at the same time, press the button “HOUR”
.
• To set the minute indicator, press and hold the button “ALARM”
and,
at the same time, press the button “MIN”
.
c) To switch the alarm function on or off
• Press the button “AL.ON/OFF”
to switch the alarm function on.
In the display
a clock symbol appears to serve as a check.
• Press again on the button “AL. ON/OFF”
to switch the alarm function
off. The clock symbol disappears from the display
.
When everything is programmed as described, the appliance switches itself
on automatically at the programmed alarm time.
• Press the button “AL. ON/OFF”
and subsequently the button “POWER
OFF”
to switch the radio off. The alarm function remains activated.
IB_61893_SWED100A1_LB4.qxd 24.02.2011 11:02 Uhr Seite 8