Silvercrest DTL + 1026 - Manual (Page 18)

18
IE
UK - 16 -
ELECTRICAL CONNECTION
1) For Great Britain only
Warning - this appliance must be earthed
Fuse replacement
If the mains lead of this appliance with a BS 1363A
13amp. fused plug, to change a fuse in this type of plug
use an A.S.T.A. approved fuse to BS 1362 type and pro-
ceed as follows:
1. Remove the fuse cover (A) and fuse (B).
2. Fit replacement 13A fuse into fuse cover.
3. Refit both into plug.
Important:
The fuse cover must be refitted when changing a fuse
and if the fuse cover is lost the plug must not be used
until a correct replacement is fitted.
Correct replacement are indentified by the colour insert
or the colour embossed in words on the base of the plug.
Replacement fuse covers are avaible from your local
electrical store.
2) For the Republic of Ireland only
The information given in respect of Great Britain will fre-
quently apply, but a third type of plug and socket is also
used, the 2-pin, side earth type.
3) Socket outlet / plug (valid for both countries)
If the fitted plug is not suitable for your socket outlet,
please contact Whirpool Service for further instruction.
Please do not attempt to change plug yourself. This pro-
cedure needs to be carried out by a qualified Whirpool
technican in compliance with the manufactures instruc-
tions and current standard safety regulations.
PDF created with pdfFactory Pro trial version www.pdffactory.com