Silvercrest SKAS 1000 A1 - Manual (Page 29)

- 27 -
• Do not move the coffee machine during the
brewing process.
• Remove the jug first when the brewing process
is complete and the filter has fully drained itself.
Risk of stumbling!
• Lay the power cable in such a way that no one
can tread on or trip over it.
• Do not use an extension cable.
Warning regarding appliance
damage!
• NEVER operate this appliance when it is empty
(without water). If you do, the glass jug could
shatter.
Intended Application
The coffee maker is intended exclusively for brewing
coffee. This coffee maker is intended exclusively for
use in private households. Do not use it commer-
cially. This appliance is intended only for indoor
use.Pay heed to all of the information in this opera-
ting manual, especially the safety instructions. All
other uses are deemed to be improper and may result
in property damage or even in personal injury. We
shall not accept liability for damages caused due
to improper use of the appliance.
Delivery Contents
Coffee Maker
Glass jug
Measuring spoon
Operating Instructions
Description
You can prepare hot filter coffee with the coffee
machine.Brewed coffee can be kept warm in the jug
by leaving it on the heating plate with the appliance
switched on.
Appliance Overview
1 Filter insert
2 Aroma selector switch
3 Water tank lid
4 Water volume indicator
5 On/Off switch with integrated control lamp
6 Measuring spoon
7 Filter holder
8 Coffee exit
Setting up and connecting to
the power supply
Risk of electrocution!
Under no circumstances should the appliance be
located close to water, especially sinks and waterfilled
vessels. Use the coffee machine only on a dry
surface. The proximity of water presents a danger,
even when the appliance is switched off. After use,
always remove the plug from the power socket.
Risk of fire!
Never locate the coffee machine close to sources of
heat.
The appliance could be damaged.
Attention!
To avoid damage to the coffee machine and its
place of location, use the coffee machine only
on a level and heat-resistant surface.
IB_57455_SKAS1000A1_LB5 09.09.2010 16:33 Uhr Seite 27