Silvercrest SMK 15 A1 - Manual (Page 10)

8
4. Remove the fuse D. 5. Insert a new type T6.3AL 250V fuse.
6. Reassemble the car plug in the reverse
order.
Note:
The metal tip E is held by the fuse.
Check that it is correctly positioned when
reassembling the plug.
6. Disposal
6.1 Appliance
The symbol with the crossed-
out rubbish bin on wheels
means that within the European
Union, the product must be dis-
posed of to a sorted rubbish
collection. This applies to the
product and all accessories which are
marked with this symbol. Marked products
must not be disposed of via the regular
domestic waste but must be handed in to a
recycling centre for electrical or electronic
devices. Recycling helps to reduce the use of
raw materials and to relieve the environ-
ment. You can obtain information about dis-
posal and the location of your nearest
recycling centre from your local waste
management service, for example, or Yellow
Pages.
6.2 Packaging
Dispose of the packaging in accordance
with the environmental regulations in your
particular country. In Germany, make use of
Dual System collection (Green Dot) for
disposing of the packaging.
7. Technical Data
Mains connection: 230 V~, 50 Hz
Connection to car electrical system: 12 V
Power consumption at 230 V: Cooling: max. 60 W, warming: max. 50 W
Power consumption at 12 V: Cooling: max. 50 W, warming: max. 40 W
Design temperature: 16 °C
Net capacity: 15 l
Gross capacity: 16 l
Blowing agent: C
5
H
10
Climate class: N
E
RP62053 MiniCooler LB6 Seite 8 Mittwoch, 12. Januar 2011 10:45 10