Silvercrest SUR 46 A1 - Manual (Page 17)

17 GB
Operation
If the cleaning process is started several the liquid becomes very
warm (approx. 30 °C after the first cleaning process and approx.
45 °C after the third in spite of a five-minute cooling down phase).
However, it is recommended that between the cleaning processes
a pause of at least five minutes is inserted in order to allow the
device to cool down. Do not change the time interval while a
cleaning process is still running. Allow the time interval to expire
normally, thus ensuring that the cleaning process is properly
time-controlled.
6. If you wish to repeat the cleaning process, press the timer button 4 .
The next timing program appears on the display 2 .
7. Set the desired time interval from the five time interval settings
available using the timer button 4 .
8. Press the On-switch 1 and start the cleaning process.
9. After the cleaning process has ended, remove the mains plug 12
from the socket, open the cover 5 and take the cleaned object
out of the device.
Note: In order to avoid lime residues, always empty the stainless
steel tank
7 and wipe dry with a fabric or microfibre cloth.
We recommend that the liquid should be renewed after every
cleaning process if possible.
10. Please store the device in a cool and dry place.
Cleaning with Inserts
Note: The basket insert 9 absorbs one third of the ultrasonic waves
and therefore reduces the cleaning performance. It may therefore be
necessary to carry out several cleaning processes.