Silvercrest SRD 250 A2 - Manual (Page 15)

13 SRD 250 A2
GB
Handling and operation
NOTE
The technical realities of the appliance permit an adjustable ►
frequency range outside the permitted frequency ranges
of VHF (FM) 87.5 - 108 MHz and/or MW (AM) 526,5 -
1606,5 kHz. In some countries, diff erent national regulations
may apply to the assigned radio frequency ranges. Please
note that information received outside of the assigned radio
frequency ranges may not be used, passed on to third parties
or otherwise misused.
Programming the wake time and method
When programming the alarm times, you can select whether,
at the programmed time, alarm tones should sound or the radio
should start playing. Two diff erent alarm times (Alarm 1/Alarm 2)
can be programmed.
Press and hold the AL1 button ♦ 16 or AL2 button 15 . In the display 2
the hour indicator blinks.
Press or hold down the UP button ♦ 12 or DOWN button 10
to set the hour.
Press the AL1 button ♦ 16 or AL2 button 15 again. In the display 2
the minute indicator blinks.
Press or hold down the UP button ♦ 12 or DOWN button 10
to set the minutes.
Press the AL1 button ♦
16
or AL2 button
15
again. The set wake
time is accepted and in the display 2 appears the wake method
indicator.
Press the UP button ♦ 12 to set the desired wake method ( =
Alarm tone or = Radio).
Buch_66666_LB4 indb Abs2 13 15 06 2011 12 06 50 Uhr