Silvercrest Electrical Sockets - Manual (Page 2)

6 GB
Introduction
Electrical Sockets
Q Introduction
Q
Proper handling
The radio-controlled socket set is suitable
for switching electrical equipment on and
off by remote control. It also supports the
dimmer function for the lamps described
in these instructions. The dimmer radio-
controlled socket is not designed for use
with energysaving light bulbs and fluo-
rescent lamps. Any alterations to this
device are not in accordance with regu-
lations and could represent significant
risk of accidents. The manufacturer does
not accept liability for any damage
caused through the device not being
used in accordance with the regulations.
This device is not intended for commercial
use.
Q
Scope of supply
After you have unpacked this set, please
check to make sure all the contents are
complete.
2 Remote-controlled sockets FSE B 20-A
2 Remote-controlled sockets with
dimmer function FSD B 20-A
1 4-channel remote control FSS B 20-A
1 Battery 12 V (for remote control)
1 Set of operating instructions
Q
Control elements
Remote control (fig. A):
1 Power indicator light
2 Channel ON / OFF button Channel
A, B, C, D
3 Master ON / OFF switch
4 Battery compartment lid
Remote-controlled socket (fig. B):
5 Manual ON / OFF button
6 LED power indicator
7 LEARN button
8 Child protection socket
Q Technical data
Remote control FSS B 20-A:
Battery:
A23, 12 V
Transmission
frequency:
433.92 MHz
Licensing: The system is li-
censed for general
use, is free of
charge and does
not require regis-
tration.
Range: Depending on the
circumstances
approx. 40 m under
optimum circum-
stances.
Radio-controlled sockets
FSE B 20-A and FSD B 20-A:
Rated voltage:
230 V~ 50 Hz
Breaking capacity: FSE B 20-A:
16 A 3.500 W
66538_silv_Funkschaltset_Content_GB-PL-CZ-SK.indd 6 28.06.11 15:41