Silvercrest SRR 3.7 A1 - Manual (Page 80)

GB
MT
76 SRR 3.7 A1
5) Replace the shaver unit 2.
6) To attach it, turn the catch marked with arrows in the opposite
direction to the arrow markings so that the shaving head mount-
ing can no longer be removed.
7) Remove loose hairs from the shaver with the brush t.
8) Replace the shaver unit 2 on the shaver. Ensure that it snaps
into place and is seated fi rmly.
■ Clean the housing and the mains adapter r with a damp cloth.
NOTE
If ...
– ... the shaving result is noticeably poorer, ...
– ... you have to the shave the same spot repeatedly to
achieve a good result, ...
– ... the shave takes much longer than usual, ...
– ... there is visible damage to the shaving heads, ...
... the shaving heads should be changed.
Please contact the Service Centre if you want to order shaving
heads.
Storage
CAUTION! MATERIAL DAMAGE!
Never store the shaver in the case u while the appliance is
charging. Risk of overheating!
■ Always replace the protective cap z on the shaver unit 2 when
you are not using the appliance.
■ Store the cleaned and dried appliance and its accessories in the
supplied case u.
■ Store everything in a clean, dust-free and dry place.
IB_102881_SRR3.7A1_LB5.indb 76 02.12.14 09:37