Silvercrest SRR 3.7 A1 - Manual (Page 16)

GB
12 SRR 3.7 A1
– If you want to use the broad long hair trimmer 8, attach the
trimmer unit 7 so that the broad long hair trimmer 8 is facing
towards you.
– If you want to use the narrow long hair trimmer 6, attach the
trimmer unit 7 so that the narrow long hair trimmer 6 is facing
towards you.
3) Press the on/off button 5. The battery charge level indicator q
shows the current charge level and the appliance starts.
4) When you are fi nished trimming, press the on/off switch 5 again.
5) Clean the trimmer unit 7 with the supplied brush t. For a more
thorough cleaning, read the section "Cleaning and care".
Travel lock
To ensure that the appliance cannot switch on accidentally, you can
lock the on/off button 5.
■ Press and hold the on/off button 5 until the symbol 9 appears
on the display.
If you now press the on/off button 5, the
symbol 9 and the
battery charge level indicator q appear. The appliance will,
however, not switch on.
■ If you want to release the lock, press and hold the on/off button 5:
– the
symbol 9 appears and starts to fl ash.
The appliance can now be switched on.
IB_102881_SRR3.7A1_LB4.indb 12 02.12.14 09:33