Elta 6698RB - Manual (Page 18)

18.
Fast Forward and Rewind
Press and hold SKIP+ or SKIP- to access fast forward or rewind functions through the track to search for a
certain position. The volume is decreased.
Program Playback
Up to 20 tracks can be programmed in your desired sequence; any track can be programmed more than
once.
1. Before programming, please press STOP and PROGRAM. The display shows
also 000 and PROG besides CD .
2. Select the first desired track with SKIP+, SKIP-, +10 or -10.
3. Save the track with PROGRAM. The display shows besides CD and PROG also
P01. Now select the next track.
4. Repeat steps 2 and 3 to program further tracks, the maximum number of tracks is 20.
5. Press PLAY/PAUSE to start playback of the tracks in your desired sequence. In program mode the track
number, CD and PROG are displayed.
6. In program mode the repeat function for the complete program is available, see details under Repeat
Modes point 4.
Delete Program
Follow these steps to delete the program:
1. Open the CD compartment.
2. Set the function selector to RADIO or OFF positions.
3. Press STOP.
Repeat Modes
Several repeat modes are available on the unit; press REPEAT to access and select.
1. Press REPEAT once to repeat the current track. The display shows REP 1
besides track number and CD.
2. Press REPEAT twice to repeat the disc in its original sequence. The display
shows ALL REP besides track number and CD.
3. Press REPEAT again to return to normal playback mode. The display shows again
track number and CD.
4. You may also use the repeat function during program playback. In program mode
press REPEAT once to repeat the complete program. The display shows besides
the track number and PROG also ALL REP.
MP3 Playback from USB Device
Connect your USB device (USB stick, MP3 player, etc.) to the USB port on the front. Remove the disc from
the drive. Press STOP to toggle between disc and USB modes.
1. The display shows briefly USB, during reading “- - -“ and the number of files is displayed. Playback starts
automatically.
2. In case playback does not start automatically, please press PLAY/PAUSE to start playback of the first file
manually.
3. Press PLAY/PAUSE to pause playback; press again to continue playback. In pause mode the file number
flashes.
4. Press STOP to stop playback; the display shows again the total number of files.
Notes:
USB playback is also stopped when:
a. Opening the CD compartment;
b. Sliding the function selector to RADIO or OFF positions;
c. All files on the USB device have been played.