Silvercrest SEAS 20 A1 - Manual (Page 37)

- 35 -
• Retain the packaging, either for storing the appliance or for reuse in the
event of posting it to Customer Services for repair.
• Before the first usage thoroughly clean all component parts as described
in the section "Cleaning and care".
Placement
• Place the appliance on a stable and slip-free surface.
• Then insert the plug into the power socket.
Adjustment
• To select the required sharpening function q w e , turn the function
cap y until the cap perceptibly engages.
• In the position w “Knife with serrated edge” the relevant symbol points
to the grinder opening (see Fig. C)– however, the cap engages at that
point.
• Hold the switch i pressed down. The grindstone t revolves continuous-
ly until the switch i is released.
Sharpening
• First present the blade when the grindstone t is revolving.
• Always draw the knife or scissors back, from the blade stop, in an even
movement, not in a repetitive back and forth movement – otherwise the
result will be an uneven sharpening.
• Do not apply any great pressure and always sharpen only clean blades,
so as to avoid a premature wearing-out of the grindstone.
IB_75468_SEAS20A1_LB2 26.04.2012 16:35 Uhr Seite 35