EverFocus EDVR 16D1 - Manual (Page 61)

54
5.9 SYSTEM SETTING
Figure 5.23 is a screen shot of the SYSTEM SETTING MENU. This menu is for setting up the system
configurations of the DVR. There are 6 subentries in the SYSTEM SETTING MENU: Date/Time, Daylight
Saving, User, Security, I/O Control and Firmware & Misc.
Figure 5.23 (System Menu – Date/Time)
5.9.1 Date/Time
Time Zone: You can set the time zone that the DVR adjusts to when updating from the time server.
Date: Set current Date.
Time: Set current Time.
Date Format: Choose date format from yyyy/mm/dd, dd/mm/yyyy, and mm/dd/yyyy.
Time Format: Change time format between 12H and 24H mode.
NTP Update Interval: The frequency that the system updates the correct time automatically when network
is connected. Select either Off, Daily, Weekly, or Monthly.
NTP Server: You can set the time server address that the DVR connects to for time synchronize. To find a
compatible NTP address, please follow these steps:
a) Go to a PC that is connected to the internet.
b) Click on “START” -> “RUN” -> type “command” and press “OK”.
c) In the DOS Prompt, type “ping pool.ntp.org” to find out the IP address of an NTP Server.