Silvercrest SHTK 2000 A1 - Manual (Page 36)

33
GB
MT
SHTK 2000 A1
Drying and styling hair
■ For quick hair drying, we fi rst recommend using a high blower and heater
setting for a short period. After slightly drying the hair, switch to a lower
blower and heater level to shape the hair.
■ With the supplied styling jet 1 you can apply a directed airfl ow to shape
and style your hair. Place the styling jet 1 on the front of the hair dryer such
that it engages and is seated fi rmly into place.
■ If you want to dry your hair very gently, or use the dryer with so-called “air-
dried perms”, attach the fi nger diff user 8. First remove the styling jet 1, if
it is fi tted, and then attach the fi nger diff usor 8, such that it engages and is
seated fi rmly into place.
■ Before you comb your hair out, allow it to cool so that the shaping and styling
can retain its form.
■ For cooling the hair you can use the cooling level button 7
❄
or level
of the heat level switch 6.
Cleaning
RISK OF ELECTRIC SHOCK
► Always remove the mains plug from the socket before you clean the appliance.
► Under no circumstances may you immerse the appliance in water or other
liquids when cleaning it!
► After being cleaned, the hair dryer must be completely dry before using it
again.
WARNING - RISK OF PHYSICAL INJURY!
► Allow the appliance to cool suffi ciently before cleaning it.
CAUTION - PROPERTY DAMAGE!
► Do not use any aggressive cleaning liquids or solvents. They could damage
the surface.
Cleaning the housing
■ Use a soft cloth lightly moistened with a mild soap solution to clean the housing
and attachments.
■ Please dry everything off properly before using the appliance again.