Silvercrest SHTK 2000 A1 - Manual (Page 13)

10
GB
SHTK 2000 A1
Cleaning the air suction grill
WARNING - RISK OF FIRE!
► Clean the air intake grill 3 at regular intervals with a soft brush.
1) Turn the air intake grille 3 slightly so that it can be removed from the hair-
dryer.
2) Clean the openings of the air intake grill 3 with a soft brush.
3) Replace the air intake grille 3 back onto the hair dryer so that the lugs on
the air intake grille 3 engage in the slots on the housing of the hairdryer.
Turn the air intake grille 3 slightly so that it engages and is fi rmly seated on
the housing.
Storage
CAUTION - PROPERTY DAMAGE!
► First pack and transport the hair dryer when it has completely cooled
down. Otherwise, it could damage other items.
■ Clean the hair dryer as described in the section “Cleaning”.
■ Retract the cord by pressing the cord retract button 2.
■ Store the hair dryer at a dustfree and dry location.
Troubleshooting
Should your hair dryer not function as expected, fi rst remove the plug from the
mains power socket and allow the appliance to cool down for a few minutes.
The appliance is fi tted with an overheating protector!
Should the appliance still not function, consult the service department detailed
under “Service”.
Disposal of the device
Do not dispose of this appliance in your normal domestic waste.
This product is subject to the provisions of European Directive
2002/96/EC.
Dispose of the appliance through an approved disposal centre or at your com-
munity waste facility.Pay heed to the currently applicable regulations. In case of
doubt, please contact your waste disposal centre.