Clock – Silvercrest SST 50 A1 User Manual

Page 13

Advertising
background image

11

GB

the first station with a sufficiently
strong signal.

Storing a station

You can store up to 20 FM Stations.
1. Select the desired station.
2. Press

38 / MEM 26. A preset number,

e.g. 02 appears in the display.

3. Briefly and repeatedly press

/

set 25 /

/set 36 to change the

preset number. The preset numbers
are shown in the display.

4. Store the station by pressing

38 /

MEM 26 again.

5. Repeat steps 1 to 4 to store more sta-

tions.

Accessing stored stations

Remote control: press

/set

25

/

/set

36.

On the device: briefly press

SET /

M 15 or

SET / M+ 16.

9.

Clock

9.1

Setting the clock

TIP:

If no button is pressed in setting mode
for about 5 seconds, the function is
cancelled.

The time is displayed in 24-hour for-
mat.

After a power failure you will need to
reset the clock and alarm time.

To set the time, the device needs to be
switched on at the power switch
(POWER 6 on ON).
1. To switch the device to standby mode,

if necessary, press ON/STANDBY 11.

2. Press TIME SET 12 on the device.

The hours symbol flashes.

3. Press

¢ UP 20 or 4 DOWN 21 to

set the hours and then press TIME
SET 12
. The minutes symbol flashes.

4. Now press

¢ UP 20 or 4

DOWN 21 to set the minutes.

5. Press TIME SET 12 to finish inputting

the time.

9.2

Alarm function (alarm
clock)

TIP:

The time needs to be set correctly be-
fore an alarm can be set.

If you do not press any button for
about 5 seconds, the function is can-
celled.

If you wish to wake up to music from
your iPod, it must be inserted in the
dock 1.

Setting the alarm clock

To set the alarm, the device must be
switched to standby mode with

ON/

STAND-BY 40.
1. Press

/set

36

for about 2 sec-

onds. The symbol for Alarm1

and

the hours symbol flash in the display.

2. Press

4 1 38 or 33 ¢ 28 to

set the hours and then press

/

set 36. The minutes symbol flashes.

3. Now press

4 1 38 or

33 ¢ 28 to set the minutes.

4. Press

/set

36 to finish inputting

the alarm time.

5. Set the way in which you wish to be

awoken. Briefly and repeatedly press

/set

36 to be awoken by an

alarm

tone ,

iPod

or

the

radio .

TIP:

Select the track you wish to wake up
to on the iPod.

The radio will wake you with the last
selected station.

When inputting the time, press and
hold

4 1 38 or 33 ¢ 28 to

fast forward/back.

__DT53143_B6.book Seite 11 Dienstag, 24. August 2010 5:14 17

Advertising