Silvercrest SUR 46 B1 - Manual (Page 39)

37 GB
CDs/DVDs
WARNING! Risk of material
damage!
•
Do not clean objects whose surfaces
show scratches, since these scratches
may deepen during the ultrasonic treat-
ment.
• Do not clean CDs/DVDs more than
once and only briefly (90 seconds).
• Clean CDs/DVDs only with water with-
out cleaning additives: dishwashing
detergents may remove the label.
• Secure data on CDs/DVDs prior to the
cleaning process.
• Figures C+D: Place one CD/DVD on
the spindle12. Use the spacer ring if
you wish to clean 2 CDs/DVDs simulta-
neously.
Toiletries / writing utensils
You can use the ultrasonic cleaner to clean
dentures/braces, shaving heads of electric
razors, razor blades and similar toiletries.
The device is also suited for cleaning e.g.
tips of fountain pens, sleeves of ballpoint
pens and printer nozzles.
6.4 Cleaning process
DANGER of electric shock!
• Only connect the device to an easily
accessible wall socket whose voltage
corresponds to the specifications on the
rating label. The wall socket must con-
tinue to be easily accessible after the
device is plugged in.
• Pull the mains plug5 out from the wall
socket after every use.
DANGER by ultrasonic
waves!
• Do not touch the inside of the stainless
steel tank or the cleaning fluid during
the cleaning process: ultrasonic waves
may cause injury to health.
WARNING! Risk of material
damage!
•
Never use the device without water,
since this may damage it.
• Once you have used the device five
times in a row, stop the cleaning process
and leave it to cool to room temperature.
• An extended cleaning period and repeat-
ed cleaning may cause loosely fastened
fittings, labels or decoration at objects as
well as other parts, which are not fixed
such as screws of eyeglass frames, to
come off during the cleaning process.
• Adding dishwashing detergent may
cause the removal/dissolution of labels
and adhesives.
1. Open the lid4.
2. Fill the stainless steel tank2 with cleaning
fluid. The cleaning fluid must cover the
parts to be cleaned. However, the maxi-
mum filling level MAX1 must not even
be exceeded with the objects in place. A
suitable cleaning fluid is usually cold,
clean tap water. The cleaning effect can
be intensified by adding dishwashing de-
tergent (please observe manufacturer's in-
formation). Do not use corrosive cleaning
agents, ammonia, bleach or strongly per-
fumed cleaning agents.
3. Place the objects to be cleaned in the ul-
trasonic cleaner. Use the insets.
4. Close lid4.
5. The device is switched on when the
mains plug is connected. Connect the
mains plug5 with a wall socket. The
display6 shows
180.
__GRA100117_B2.book Seite 37 Montag, 2. Juni 2014 9:47 09