Silvercrest SWKT 3000 B2 - Manual (Page 49)

46 SWKT 3000 B2
GB
■ Clean the exterior surfaces and the power cable with a slightly damp cloth.
Be sure to dry the appliance well before taking it back into use. For stubborn
soiling use a mild detergent on the cloth. Ensure that there are no detergent
residues in and on the appliance before it is taken back into use.
In the event of scale deposits:
Scale deposits on the bottom of the appliance lead to increased energy con-
sumption and reduce the service life of the appliance.
Descale the appliance as soon as scale deposits become apparent.
■ Before descaling, remove the scale fi lter insert 7 (see chapter “Inserting/
removing the scale fi lter insert”).
■ Use a descaler designed for household appliances (e.g. for coff ee machines).
Proceed as detailed in the instructions provided for the use of the decalcifying
agent.
■ After descaling, rinse the appliance with lots of clean water.
Inserting/removing the scale fi lter insert
1) Open the lid.
2) Pull the scale fi lter insert 7 upwards out of its holder while pressing lightly
against the top corners.
3) Clean the scale fi lter insert 7 with a slightly moistened dishcloth and under
running water.
4) After cleaning, insert the scale fi lter insert 7 again. Ensure that the holder
engages and that the scale fi lter insert 7 is fi rmly seated.
NOTE
► If the scale deposits in the scale fi lter insert 7 have solidifi ed, place the
fi lter in a water-vinegar solution at a ratio of 6:1 for a few hours. The scale
deposits will dissolve themselves. Rinse the scale fi lter insert 7 with plenty
of clear water.
Storage
■ Allow the appliance to cool down completely before putting it into storage.
■ Wind the power cable around the cable winder 4 under the base 3.
■ Store the appliance at a dry location.