EAW KF910 - Manual

SPECIFICATIONS KF910
PHYSICAL
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 [email protected] www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. KF910/888056(A)/2 pp 1/29/99 Printed in USA
DESCRIPTION
PERFORMANCE
APPLICATION
A dedicated PPST long throw high frequency system in a
trapezoidal enclosure. Includes 5x 2-in exit compression driv-
ers on SimplePhase™ horns.
The KF910 PPST long throw HF module is engineered for use
in KF900 Series arrays. It provides HF coverage from 0° to 15°
below the array. It is engineered to provide extended high fre-
quency response at distances in excess of 600 ft. KF900 Series
modules can only be used in arrays and must be integrated
with complex PPST processing. Six year warranty.
Applications include:
Stadiums Concert Tours
Frequency Response (1 Watt @ 1m)
±3 dB 500 Hz to 14 kHz
-10 dB 400 Hz to 2 16 khz
Efficiency/Axial Sensitivity (dB SPL, 1 Watt @ 1m)
HF 117
Impedance (Ohm)
HF 5x 8
Power Handling, AES Standard (Watts)
HF 5x 200
Recommended Amplifier Power (Watts)
HF 5x 400
Calculated Maximum Output (dB SPL)
HF Peak 153.0
HF Long Term 146.0
Nominal Coverage Angle/-6 dB points (degrees)
Horizontal 30
Vertical Beam profile adjustable via PPST
processing
Recommended Complementary Systems
Sub KF940
LF KF930
Mid/High KF920/KF911
Part Number 999522
HF Subsystem & Loading 5X 2-in exit compression drivers
on 30° (H) SimplePhase horns
System Configuration Dedicated HF, long throw
Powering Configuration Active processing
System Crossover 800 Hz to 1300 Hz
Controls (switches, knobs) None
Recommended High-Pass
Frequency (24 dB/Octave) 1250 Hz, 500 Hz minimum
Cabinet Type (shape) Trapezoidal
Enclosure Materials Baltic birch plywood
Finish Black catalyzed polyurethane
Connectors One each male and female AP6,
2x Neutrik NL4 Speakon
Suspension Hardware (16) 3/8”-16 threaded mounting
suspension points (4 each top,
bottom and sides)
Grille Vinyl coated perforated steel,
foam backed
Dimensions inches millimeters
Height 46.00 1168
Width (Front) 30.00 762
Width (Rear) 8.56 217
Depth 40.00 1016
Trapezoid Angle 15° per side
Weights pounds kilograms
Net Weight 288 131.0
Shipping Weight 293 133.3
Prototype shown with temporary hardware