ELAN Home Systems Digital Music Server - Manual (Page 9)

E L A N H O M E S Y S T E M S USER GUIDE
Page 8 © ELAN Home Systems 2004 • All rights reserved. 02/04
1
DATA
Allows the VIA!dj to send control information to other supported
devices.
2
USB
Allows the VIA!dj to communicate with supported USB devices
such as PDAs.
3 CONTROLLER
The Controller port provides RS232 communication with
supported devices.
4 ETHERNET
The Ethernet port can be used to connect the VIA!dj to a high
speed internet connection. It may also be used by supported
software applications to communicate with the system. A
shielded Ethernet cable should be used in conjunction with this
connection.
5
IR INPUT JACK
The IR input jack allows remote control information to be
carried from other devices directly into the VIA!dj.
6 VGA
The VGA connector may be used to connect a VGA monitor or
a suitable Plasma screen for displaying the User interface.
7 MODEM
The Modem port can be used to connect the VIA!dj to a
standard analog telephone line for internet access (using the
supplied cable).
8 COMP VIDEO OUT
The Composite Video Output is used to send the VIA!dj’s
video display to VIA! Touch Panels and televisions throughout
the home. You may need to switch the TV to the relevant AUX
input to display the picture.
9 S-VIDEO OUT
Connect the S-VIDEO output of the VIA!dj to the S-VIDEO
input of a suitable TV to display the user interface. You may
need to switch the TV to the relevant AUX input to display the
picture.
10 DIGITAL OPTICAL IN [SEE ADDENDUM]
High Quality recordings can be made onto the Hard Disk of the
VIA!dj using an optical connection from a suitable device (such
as Minidisc or DAT).
11 DIGITAL OPTICAL OUT
The digital optical output can be used to transmit high quality
audio to a device with a digital optical input, such as the sur-
round sound processor or A/V receiver in your home theater,
using an optical fiber cable.
12 DIGITAL IN—COAXIAL [SEE ADDENDUM]
High Quality recordings can be made onto the Hard Disk of the
VIA!dj using a coaxial connection from a suitable device (such
as Minidisc or DAT).
13 DIGITAL OUT—COAXIAL
By connecting this jack to a digital audio component (such as
the surround sound processor or A/V receiver in your home
theater), digital signals from the VIA!dj can be transmitted
directly from the system without first being converted to analog.
14 ANALOG IN [SEE ADDENDUM]
Analog sources (such as cassette or vinyl LP) may be recorded
onto the Hard Disk of the VIA!dj using this connection
.
15 ANALOG OUT 1,2,3
The VIA!dj is a multiroom device allowing you to listen to differ-
ent music in different rooms all at the same time. Each analog
output should be connected to the source input jacks of your
ELAN multi-source/multi-zone controller.
16 MAINS
Connect the supplied mains lead to this connector to provide
power to the unit.
CONTROLS AND CONNECTIONS
REAR PANEL