Silvercrest EDS-SSM 600 B2 - Manual (Page 52)

50 EDS-SSM 600 B2
GB
Wall mounting
2 plugs and 2 screws are supplied to enable the wall bracket 6 to be mounted.
WARNING RISK OF ELECTRIC SHOCK!
► Before mounting the wall bracket 6, check whether there are any power
cables or pipes in the wall!
1) Mark the positions for the drill holes using the wall bracket 6.
2) Bore the holes with a 6 mm drill.
3) Insert the dowels into the drill holes.
4) Position both openings of the wall-holder 6 over the drill holes and then fi x
it tightly using both screws.
Cleaning
RISK OF ELECTRIC SHOCK!
► Before you clean the hand blender, unplug the appliance from the power
socket.
► Under no circumstances may the motor unit 4 be cleaned by immersing
it in water or holding it under running water.
WARNING - RISK OF PHYSICAL INJURY!
► Handle the extremely sharp blade with caution, it can cause injuries.
WARNING - PROPERTY DAMAGE!
► Do not clean the attachments of your hand blender in the dishwasher, as it
may cause damage to them.
► Do not use aggressive, chemical or abrasive cleaning agents! They could
irreparably damage the upper surfaces!
IB_75748_EDS-SSM600B2_LB2.indb Abs2:50 IB_75748_EDS-SSM600B2_LB2.indb Abs2:50 28.06.12 15:19 28.06.12 15:19