Storage, Disposal – Silvercrest SDB 2200 B1 User Manual

Page 9

Advertising
background image

7

GB

Cleaning appliance

Use only a slightly damp, soft cloth to
clean the iron.

Use standard cleaning products for
chrome, silver or stainless steel to
remove soiling from the soleplate 7.

Caked-on residues can be removed
by heating the steam iron up to MAX
and ironing over an old cotton cloth.

Self-cleaning

CAUTION: Do not add vinegar, descaler
or other products to the water tank 8: They
might damage the appliance.

If you use tap water, you should carry out
the self-clean operation after every use.
Otherwise self-cleaning should be per-
formed at least twice a month.
1. Fill the water tank 8.
2. Set the steam iron in a vertical position.
3. Insert the power plug into a wall socket.

The

pilot light 1 on the handle 2 lights up.

4. Set the steam level controller 13 to

and the temperature controller 9

to MAX.

5. Wait until the temperature control lamp 5

is extinguished.

6. Hold the appliance horizontally over a

heat-proof kitchen bowl.

7. Press SELF CLEAN 10 and hold

down. Limescale residue is now
ejected with steam and hot water from
the steam openings in the soleplate 7.
Hold the button down until steam or
hot water are no longer ejected.

8. Repeat steps 1. to 7. until there are no

more residues.

9. Unplug the appliance, allow it to cool

down and pour away any water left in
the tank.

6.

Storage

DANGER! The steam iron should
be kept out of the reach of chil-
dren.

1. Set the temperature controller 9 to MIN.
2. Leave to cool down.
3. Set the steam level controller 13 to

and pour out any remaining water

through the filler opening of the water
tank 8.

4. Wind the power cord 4 up around the

back of the appliance, making sure it
is not too tight.

5. Store the steam iron in a vertical posi-

tion, not standing on the soleplate 7.

7.

Disposal

The symbol showing a
wheelie bin crossed
through indicates that the
product requires separate
refuse collection in the Eu-
ropean Union. This applies
to the product and all ac-
cessories marked with this symbol. Prod-
ucts identified with this symbol may not be
discarded with normal household waste,
but must be taken to a collection point for
recycling electric and electronic applianc-
es. Recycling helps to reduce the con-
sumption of raw materials and protect the
environment.

Packaging

When disposing of the packaging, make
sure you comply with the environmental
regulations applicable in your country.

__RP_70069_B4.book Seite 7 Dienstag, 1. November 2011 4:08 16

Advertising
This manual is related to the following products: