Storage, Inserting/removing the scale fi lter insert, Gb ie – Silvercrest SWK 3000 EDS B2 User Manual

Page 12

Advertising
background image

9

SWK 3000 EDS B2

GB

IE

In the event of scale deposits:

Scale deposits on the bottom of the appliance lead to increased energy con-
sumption and reduce the service life of the appliance.
Descale the appliance as soon as scale deposits become apparent.

Before descaling, remove the scale fi lter insert 6 (see chapter “Inserting/
removing the scale fi lter insert”).

Use a descaler designed for household appliances (e.g. for coff ee machines).
Proceed as detailed in the instructions provided for the use of the decalcifying
agent.

After descaling, rinse the appliance with lots of clean water.

Inserting/removing the scale fi lter insert

1) Open the lid.

2) Press the tab on the scale fi lter insert 6 slightly downwards and then pull the

scale fi lter insert 6 inwards and downwards so that you can pull it out of its
mounting.

3) Then pull the scale fi lter insert 6 upwards and out of the kettle.

4) Clean the scale fi lter insert 6 with a slightly moistened dishcloth and under

running water.

5) After cleaning, insert the scale fi lter insert 6 again. Ensure that it is sitting

correctly in its mounting, and that the tab has clicked into place.

NOTE

If the scale deposits in the scale fi lter insert 6 have solidifi ed, place the
fi lter in a water-vinegar solution at a ratio of 6:1 for a few hours. The scale
deposits will dissolve themselves. Rinse the scale fi lter insert 6 with plenty
of clear water.

Storage

Allow the appliance to cool down completely before putting it into storage.

Wind the power cable around the cable winder 4 under the base 3.

Store the appliance at a dry location.

Advertising
This manual is related to the following products: