Connecting the cables – Silvercrest SLNB 401 A1 User Manual
Page 59
Advertising
Universal Quad LNB SLNB 401 A1
English
- 57
Connecting the Cables
Only use high-end coaxial cable.
Use a sharp knife to remove 10 mm of the outer insulation from the
cable end. Make sure that the shielding net does not get damaged.
Next move the shielding net around the outer insulation of the cable
end.
Remove 7 mm of the central lead insulation of the cable end. Make
sure that the central lead does not get damaged.
Next rotate and push the F-type connector onto the cable end as
shown in the following figure.
Dimensions mm
Advertising