Cleaning and care, Cleaning the housing, Cleaning the hair and beard clippers – Silvercrest 7133016 User Manual
Page 17
17
GB
Q
Cleaning and care
CAUTION! DANGER OF ELECTRIC SHOCK!
WARNING!
As the device is not waterproof, the hair and beard
clippers should not be immersed in water or other liquids when cleaning
it. This could lead to live parts (rechargeable batteries) being damaged.
J
Remove the adapter from the socket before cleaning the hair and
beard clippers.
J
Never touch the mains adapter with wet hands when you insert or
pull out the adapter from the mains socket.
J
Always keep the mains adapter and lead dry.
Q
Cleaning the housing
j
Clean the housing using a slightly moist cloth.
Q
Cleaning the hair and beard clippers
j
Switch off the hair and beard clippers.
j
Disconnect the cable from the hair and beard clippers and remove
the adapter from the socket.
j
Remove and clean the comb attachment
1
.
NOTE: Turn the device onto its back and, using your thumbs, push
the comb attachment
1
carefully upwards over the locking pins on
the sides (last possible setting adjustment 32 mm); see also Fig. A.
Now you can remove the comb attachment
1
.
Cleaning and care