Silvercrest SKAT 1000 A1 - Manual (Page 31)

- 29 -
• Press and hold down the button "prog" h .
• Enter in the desired start time with the buttons "h"
j and "min" u (see chapter "Setting the
timer").
• When the desired time has been entered,
release the button "prog" h . The Timer is set.
• Enter in the desired coffee strength by turning the
aroma knob o .
• Press the button "auto" i until the green
indicator s lights up.
• If you wish to deactivate the automatic brewing
start, press the button "off" d .
Cleaning and care
• Always remove the plug from the power socket
before cleaning the appliance.
Danger of electrical shock
Before you clean the Coffee Maker, you must
remove the power plug from the power socket.
Caution
When cleaning the Coffee Maker, under no
circumstances may you submerse it in water or
hold it under running water.
Risk of burns!
Always wait until the Coffee Maker has cooled
down before cleaning it.
Take off the lid of the thermos jug r , when
cleaning (see Fig
)
• Do not use household detergents or sharp/
pointed objects to remove soiling. These could
damage the Coffee Maker.
• Wipe the housing of the Coffee Maker and the
thermos jug r with a soft cloth lightly moistened
with a soapy solution.
• After every brewing process remove the filter
bag from the filter insert y .
• Remove the filter and rinse the filter holder q ,
the filter insert y and the thermos jug r under
running water.
• Use a dry cloth to wipe it again.
Cleaning of the lid
• To clean the lid of the thermos jug r first
disassemble the lid (See Fig.
):
• Carefully pull off the silicone disc from the valve
at the underside of the lid. When doing this, hold
the valve, because it is pressed up by a spring
from the other side.
• You now can take off the valve and the spring.
• Clean all parts with a mild soapy solution and
wipe them off well.
• To assemble the lid again, proceed in reversed
order.
Note:
Do not let the thermos jug with lid lie in soapy water
and do not wash the parts in the dishwasher, as
they could become leaky!
If you do not use the Coffee Maker for an extended
period, store the power cable in the cable storage
compartment
t (Fig.
).
Removing scale
Remove scale from the Coffee Maker regularly.
If your water has a high degree of hardness, the
coffee maker must be descaled after every 30 ap-
plications, low degrees of hardness need only be
descaled after every 60 applications.
Use only descaling agents that are suitable for cof-
fee machines and read up the instructions.
• Insert the descaling agent into the water tank
w .
• Fill it with enough water for max. 8 large cups.
• Turn the aroma knob
o to "calc" to activate the
descaling function.
• Press the button "on" f . The red indicator a
turns on and the indicator “calc” g is blinking.
• Wait until the solution has completely run
through the Coffee Maker.
IB_56540_SKAT1000A1_LB5 07.09.2010 10:44 Uhr Seite 29