Silvercrest SHE 3 A1 - Manual (Page 15)

13 GB
Removal
Press the button 6 and remove the roller holder 2 upwards.
Attachment
1. Figure A: place the roller holder 2 on the top of the device
in such a way, that the cog wheels of the roller and the
device are above one another.
2. Press the roller holder 2 on to the device until it engages
audibly.
3. Check that it is secure.
11. Troubleshooting
If your device fails to function as required, please try this checklist
first. Perhaps there is only a minor problem, and you can solve it
yourself.
DANGER!
Do not attempt to repair the device yourself under any
circumstances.
Fault Possible causes/Action
The device cannot
be switched on.
• Are the batteries flat?
• When switching the device on, did
you press the safety button 4 too?
Increased skin irrita-
tion. • Check whether the surface of the roller
is undamaged.
__KRA106439_B3.book Seite 13 Donnerstag, 14. August 2014 4:53 16