Operation, Temperature measurements – Silvercrest KH 8105 User Manual

Page 14

Advertising
background image

16 GB/IE

Operation

3. Press the “FOREHEAD” button

4

. The hours will fl ash

and can be corrected with the “MEM / SET” button

1

.

4. Press the “FOREHEAD” button

4

again. The minutes

will fl ash and can be corrected with the “MEM / SET”
button

1

.



Repeat steps 3 and 4 to set the values for the year,
month and day or to switch the sleep mode on or off .



Temperature measurements

Measuring room temperature (standard mode)
When you have fi nished setting the time and date and do
not carry out any further procedures, the device switches
to sleep mode after 1 minute in order to save the battery.
In the condition as supplied to the customer the sleep
mode is activated, as shown by the symbol, and the LC
display

5

is completely switched off . When the sleep

mode is deactivated, the device remains switched on,
while the time and room temperature are still shown and
updated once a minute. The LC display

5

shows

the time and date alternately (Illustration D).

Measuring body temperature (ear mode)
 IMPORTANT! It is advisable to carry out 3 meas-
urements in a row on the same ear and to take the highest
temperature as the measured value. A new measurement
can be taken when the display “

” goes out.

IB_61572_KH8105_LB3.indd 16

IB_61572_KH8105_LB3.indd 16

10.12.2010 14:23:01 Uhr

10.12.2010 14:23:01 Uhr

Advertising