Electrolux LAVATHERM T35850 - Manual (Page 11)

BUZZER
The appliance is supplied with the BUZZER function deactivated.
To activate buzzer choose BUZZER option.
The buzzer sounds or plays a tune during:
– cycle end
– anti-crease phase and when phase starts or ends
– cycle interruption by a warning
– alarm
Setting delay timer
With the DELAY START button, you can delay the start of a programme by 3, 6 or 9
hours.
1. Select the programme and additional functions.
2. Press the DELAY START button as many times as necessary (the lights show which delay
time have been chosen).
3. To activate the delay timer, press the START PAUSE button. The lights ( 9H, 6H, 3H)
change on every three hours until the time is getting on for start cycle.
Starting the programme
Press the START PAUSE button. The programme is started.
The programme phase is shown by appropriate lights. From up to the down, from DRYING ,
COOLING, to END .
Changing programme
To change a programme which has been selected by mistake once the programme has
started, first turn the programme selector to OFF position. The programme is cancelled.
The programme can no longer be changed directly once the programme has started. If
nevertheless there is an attempt to change the programme on the programme knob or if
an function button (excluding the BUZZER button) is pressed, led above START PAUSE
button starts flashing temporarily in yellow. The drying programme is not however affected
by this (laundry protection).
Putting in extra items or taking items out before end of programme
1. Open loading door.
WARNING!
Laundry and drum can become hot. Risk of burns!
2. Load or remove laundry items.
3. Close loading securely. Lock must audibly lock.
4. Press the START PAUSE button to continue the drying cycle.
Drying cycle complete / removing laundry
Once the drying cycle is complete, the lights END and FILTER are on. If the BUZZER button
has been pressed, an acoustic signal sounds intermittently for about one minute.
Daily use 11