Silvercrest Z30951A Z30951B Z30951C - Manual (Page 16)

16 GB/IE
Activating / deactivating the
display illumination and
projection
You can activate the display illumination and the
projection by pressing a key, generating a noise
(e.g. a hand clap) or touching the device at any
place (acoustic and contact function).
Slide the S / C switch 25 to the ON position.
Activate the display illumination by pressing a key,
generating a noise or touching the device at
any place. The display illumination switches on
for 5 seconds and then automatically switches off.
In addition, slide the projection switch 27 to the
ON position.
Activate the projection by pressing a key, gener-
ating a noise or touching the device at any place.
The projection switches on for 20 seconds and
then automatically switches off.
Deactivate the projection by sliding the projection
switch 27 to the OFF position.
Deactivate the acoustic and contact function by
sliding the S / C switch 25 to the OFF position.
Adjusting the projection
sharpness, angle and direction
Rotate the projection objective 18 to the desired
projection direction (forwards / backwards) by
using the adjustment wheel
29 (see Fig. E).
Rotate the sharpness control wheel 19 to adjust
the projection sharpness.
Press the projection direction button 20 to turn
the projection direction through 180°.