Silvercrest Z30914 - Manual (Page 56)

GB/MT 55
Operation
Operation
Synchronising transmitter / receiver
Synchronise the transmitter and receiver as follows:
Press the synchronisation button 2 .
Press the chime button 13 ; the signal indicator 1 flashes red. The
programmed audible signal sounds and the signal indicator 1
ceases to illuminate.
If the receiver does not react as described, press the synchronisation
button 2 again to switch off the synchronisation function and repeat
the synchronisation process.
The transmitter indicates the transmission of the signal to the receiver by
the signal indicator
11 flashing briefly.
Setting the signal type
The receiver can indicate the reception of a door signal either optically
or acoustically or both optically and acoustically.
Using the signal type selector button 5 , select whether the signal
is to be indicated optically or acoustically or both optically and
acoustically.
30.06.11 15:48