Epson 777/777i - Manual (Page 14)

10
Follow these guidelines when loading paper:
■ Load the printable side face up. It’s usually whiter or brighter than the other side.
■ Load letterhead or preprinted paper into the printer top edge first.
■ Don’t load paper above the arrow on the left edge guide.
If you’re printing on envelopes, see page 15 for loading instructions.
Opening the Printer Software
After you open your application program and create your document, you’re ready to
select your page setup and other printer software settings.
From the File menu, click Page Setup . You see your application’s page setup dialog
box (your dialog box may look slightly different):
Make the following selections on the page setup dialog box:
■ Make sure SC 777 is selected. (If the model is incorrect, you need to select your
printer in the Chooser; see the Start Here sheet for instructions.)
■ Select the correct Paper Size , Orientation , and Printable Area settings for your
document. See your electronic Reference Guide for details.
■ Click OK to close the page setup dialog box and return to your application
window.
Verify your printer model here Select your Paper Size, Orientation,
and Printable Area settings
Click OK